Overview
Simple input state game that looks for a sequence of single button presses to solve. Any incorrect input will reset the sequence to the beginning.
Included in the standard firmware.
Hardware Requirements
- BAC
- 1-8 inputs (buttons, switches, controller TTL, etc.)
- Wiring
- 12V Supply
Configuration
Immediate Fail:
Whether to fail as soon as a wrong input is activated, or after full sequence length is put in. For instance if inputting a "password" with 4 digits, you might want to fail only after 4 inputs have been detected.
Learning
Learning options are accessed via Game tab and Learning button.
Procedure
- Press "Learn" to start learning.
- Trigger your inputs (i.e. press buttons) in desired sequence.
- Click "Finish Learning" to save settings.
- Input solve sequence again to verify it triggers solve event.
Interface
Learn Button
Used to start learning.
Finish Learning
Used to finish learning and save.
Wiring
