ComboLock

Overview

Included in: Combo Firmware

Implementation of classic operation of a combination lock.

Hardware Requirements

  • FX51SEN (Optional)
  • FX20 Display
  • BAC
  • Wiring
  • 12V Supply

Configuration

FX51 Address

The address of the FX51 sensor to use. A value of 113 will use the hall sensor that is built into the BAC.

Min Field Strength

Minimum strength before sensor starts accepting readings. Adjust to keep sensor from displaying noisy data as the magnet is brought to the sensor.

Noise Filtering

Averaging done to clean up noise. Lower values are more responsive but noisy, higher values are less responsive but reliable.

Output

Displays the output of the game. Includes messages when the puck is found or a value is entered.

Combination

This section contains the digits of the combination. Each text box is one digit in the sequence. Combination can be 1-10 stops long. I.e. if you want the combination 12 27 10, put 12 in the 0 box, 27 in the 1 box, and 10 in the 2 box, and click save.

0-9

Valid values are 0-39 or blank.

Wiring

diagram